Каталог
Juniper Networks Коммутатор QFX5110, 48 SFP+ and 4 QSFP28, Back to Front AC
-25%Документация
- Каталог
- Описание
- Характеристики
- Документация
Коммутаторы серии Juniper QFX5000 предназначены для построения сетей центров обработки данных на уровне агрегации и ядра. Благодаря поддержке выскокой плотности портов 1/10/40 Gbit/s, коммутаторы серии QFX являются идельным решением входящим в универсальную структуру Junos Fusion а так же Virtual Chassiss Fabric.
Основные особенности |
Технические характеристики на Juniper Networks Коммутатор QFX5110, 48 SFP+ and 4 QSFP28, Back to Front AC
Производительность | |
• QFX5110-48S | 1.76 Tbps/1.08 Bpps |
• QFX5100-32Q | 2.56 Tbps/1.08 Bpps |
Вес | |
• QFX5100-48S: | (10.43 kg) |
• QFX5100-32Q: | (11.16 kg) |
Размеры (HxWxD) | |
• QFX5100-48S: | (4.37 x 44.09 x 52.02 cm) |
• QFX5100-32Q: | (4.37 x 44.09 x 54.54 cm) |
Switching mode | Cut-through and store-and-forward |
Front-to-back or back-to-front airflow (for hot aisle/cold aisle deployment) | + |
Management and rear console port connections | + |
Энергопотребление | |
• QFX5100-48S-AFO/AFI: | 300 W |
• QFX5100-32Q-AFO/AFI: | 340 W |
Интерфейсы | |
• QFX5100-48S-AFO/AFI: | 1GbE SFP: 48 (24 copper 1GbE) |
10GbE SFP+: 48/64 (with breakout cable) | |
40GbE/100GbE QSFP28: 4 | |
• QFX5100-32Q-AFO/AFI: | 100 GbE QSFP28: 4 |
10GbE SFP+: 104 (with breakout cable) | |
40GbE QSFP+: 32 | |
• Each QSFP+ port can be configured as a 4 x 10GbE interface | + |
• Each QSFP+ port can be configured as a 40 Gbps port | + |
• USB port | + |
• Console port | + |
• 2 management ports: 1 RJ-45 and 1 SFP | + |
Поддерживаемые типы интерфейсов | |
• SFP+ 10GbE optical modules | + |
• SFP+ DAC cables: 1/3/5 m twinax copper and 1/3/5/7/10 m active twinax copper | + |
• SFP GbE optical and copper module | + |
• QSFP+ to SFP+ 10GbE direct attach break-out copper (1/3 m twinax copper cable) | + |
Охлаждение | |
• Front-to-back and back-to-front cooling | + |
• Redundant variable-speed fans to reduce power draw | + |
Блоки питания и вентиляторы | |
• Dual redundant (1+1) and hot-pluggable power supplies | + |
• 110-240 V single phase AC power | + |
• -36 to -72 V DC power | + |
• Redundant (N+1) and hot-pluggable fan modules for frontto-back and back-to-front airflow | + |
Производительность | |
• MAC addresses per system: | 288000 |
• VLAN IDs: | 4096 |
• Number of link aggregation groups (LAGs) | 128 |
• Number of ports per LAG: | 32 |
• Number of FCoE VLANs/FC Virtual Fabrics: | 4095 |
• Firewall filters: | 4000 |
• IPv4 unicast routes | 128000 |
• IPv4 multicast routes: | 104000 |
• IPv6 multicast routes: | 52000 |
• IPv6 unicast routes: | 64000 |
• ARP entries: | 48000 |
• Jumbo frame: | 9216 |
• Spanning Tree Protocol (STP) | Multiple Spanning Tree Protocol (MSTP) instances: 64 |
VLAN Spanning Tree Protocol (VSTP) instances: 253 | |
• Traffic mirroring | Mirroring destination ports per switch: 4 |
Maximum number of mirroring sessions: 4 | |
Mirroring destination VLANs per switch: 4 | |
Фунционал второго уровня | |
• STP—IEEE 802.1D (802.1D-2004) | + |
• Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP(IEEE 802.1s) | + |
• Bridge protocol data unit (BPDU) protect | + |
• Loop protect | + |
• Root protect | + |
• RSTP and VSTP running concurrently | + |
• VLAN—IEEE 802.1Q VLAN trunking | + |
• Routed VLAN Interface (RVI) | + |
• Port-based VLAN | + |
• MAC address filtering | + |
• Private VLAN (PVLAN)* | + |
• QinQ* | + |
VLAN Translation | + |
• Static MAC address assignment for interface | + |
• Per VLAN MAC learning (limit) | + |
• MAC learning disable | + |
• Link Aggregation and Link Aggregation Control Protocol (LACP) (IEEE 802.3ad) | + |
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) | + |
Link Aggregation | |
• Multi-chassis link aggregation (MC-LAG) | + |
• Redundant Trunk Group (RTG) | + |
• LAG load sharing algorithm—bridged or routed (unicast or multicast) traffic: | + |
IP: SIP, Dynamic Internet Protocol (DIP), TCP/UDP source port, TCP/UDP destination port | + |
Функционал третьего уровня | |
• Static routing | + |
• Routing policy | + |
• Routing protocols (RIP, OSPF, IS-IS, BGP) | + |
• Virtual Router Redundancy Protocol (VRRP) | + |
• Bidirectional Forwarding Detection (BFD) protocol | + |
• Virtual router | + |
• Dynamic Host Configuration Protocol (DHCP) relay | + |
• Proxy Address Resolution Protocol (ARP) | + |
Multicast | |
• Internet Group Management Protocol (IGMP): v1, v2 , V3 | + |
• IGMP snooping: v1, v2, v3 | + |
• IGMP Filter | + |
• PIM-SM | + |
• Multicast Source Discovery Protocol (MSDP) | + |
Функционал безопасности | |
• Secure interface login and password | + |
• RADIUS | + |
• TACACS+ | + |
• Ingress and egress filters: Allow and deny, port filters, VLAN filters, and routed filters, including management port filters | + |
• Filter actions: Logging, system logging, reject, mirror to an interface, counters, assign forwarding class, permit, drop,police, mark | + |
• SSH v1, v2 | + |
• Static ARP support | + |
• Storm control, port error disable, and autorecovery | + |
• Control plane denial-of-service (DoS) protection | + |
• IP Source Guard | + |
• Dynamic ARP Inspection (DAI) | + |
• Sticky MAC address | + |
• DHCP snooping | + |
Качество обслуживания | |
• L2 and L3 QoS: Classification, rewrite, queuing | + |
• Rate limiting: | Ingress policing: 1 rate 2 color, 2 rate 3 color |
Egress policing: Policer, policer mark down action | |
Egress shaping: per queue on each port | |
• 12 hardware queues per port (8 unicast and 4 multicast) | + |
• Strict priority queuing (LLQ), smoothed deficit weighted round-robin (SDWRR), weighted random early detection (WRED), weighted tail drop | + |
• 802.1p remarking | + |
• Layer 2 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN | + |
• Congestion avoidance capabilities: WRED | + |
• Trust IEEE 802.1p (ingress) | + |
• Remarking of bridged packets | + |
Virtual Chassis* | |
• 40GbE and 10GbE as Virtual Chassis port | + |
• Virtual Chassis Routing Engine (RE) election | + |
• Virtual Chassis pre-provisioning (plug and play) | + |
• Auto-LAG formation of Virtual Chassis ports | + |
• Mixed Virtual Chassis support | + |
• FCoE transit across Virtual Chassis members | + |
• QoS on Virtual Chassis ports | + |
• Local Designated Forwarding | + |
• Unified ISSU | + |
• Graceful RE switchover (GRES) | + |
• Nonstop routing (NSR) | + |
• Nonstop bridging (NSB) | + |
• Monitor distributed aggregate interface | + |
• Control plane protection for virtual RE | + |
High Availability | |
• Topology-independent in-service software upgrade (TISSU) | + |
• Bidirectional Forwarding Detection (BFD) | + |
• Uplink failure detection (UFD) | + |
MPLS | |
• Static label-switched paths (LSPs) | + |
• RSVP-based signaling of LSPs | + |
• LDP-based signaling of LSPs | + |
• LDP tunneling (LDP over RSVP) | + |
• MPLS class of service (CoS) | + |
• MPLS access control list (ACL)/policers | + |
• MPLS LSR support | + |
• IPv6 tunneling (6PE) (via IPv4 MPLS backbone) | + |
• MPLS Operation, Administration, and Maintenance (OAM)—LSP ping | + |
• IPv4 L3 VPN (RFC 2547, 4364) | + |
Функционал управления | |
• Junos Space Network Director* | + |
• Role-based CLI management and access | + |
• CLI via console, telnet, or SSH | + |
• Extended ping and traceroute | + |
• Junos OS configuration rescue and rollback | + |
• Image rollback | + |
• SNMP v1/v2/v3 | + |
• Junos XML management protocol | + |
• sFlow v5 | + |
• Junos OS event, commit, and OP scripts | + |
Зеркалирование траффика | |
• Port-based | + |
• LAG port | + |
• VLAN-based | + |
• Filter-based | + |
• Mirror to local | + |
• Mirror to remote destinations (L2 over VLAN) | + |
Документация на Juniper Networks Коммутатор QFX5110, 48 SFP+ and 4 QSFP28, Back to Front AC
Коммутатор Juniper QFX10002, 36 портов 40G QSFP+ / 12 портов 100G QSFP28 / 144 портов 10G SFP+
-25%Коммутатор Juniper QFX5100, 48 портов 10GBaseFX SFP+ и 6 портов 40G BaseX QSFP
-25%Коммутатор Juniper QFX5100, 24 порта 40G BaseX QSFP
-25%Коммутатор Juniper QFX10002, 72 портов 40G QSFP+ / 24 портов 100G QSFP28 / 288 портов 10G SFP+
-25%Задать вопрос
Обратная связь
Скачать каталог
nw-engineering.ru Array ( [REDIRECT_STATUS] => 200 [REMOTE_USER] => [HTTP_HOST] => nw-engineering.ru [HTTP_CONNECTION] => close [HTTP_USER_AGENT] => CCBot/2.0 (https://commoncrawl.org/faq/) [HTTP_ACCEPT] => text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 [HTTP_ACCEPT_LANGUAGE] => en-US,en;q=0.5 [HTTP_ACCEPT_ENCODING] => br,gzip [PATH] => /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin [SERVER_SIGNATURE] => [SERVER_SOFTWARE] => Apache/2.4.29 [SERVER_NAME] => nw-engineering.ru [SERVER_ADDR] => 127.0.0.1 [SERVER_PORT] => 80 [REMOTE_ADDR] => 18.205.26.39 [DOCUMENT_ROOT] => /home/c/cw17844/nw-engineering.ru/public_html [REQUEST_SCHEME] => http [CONTEXT_PREFIX] => [CONTEXT_DOCUMENT_ROOT] => /home/c/cw17844/nw-engineering.ru/public_html [SERVER_ADMIN] => info@timeweb.ru [SCRIPT_FILENAME] => /home/c/cw17844/nw-engineering.ru/public_html/bitrix/urlrewrite.php [REMOTE_PORT] => 36164 [REDIRECT_URL] => /catalog/kommutatory/juniper-networks/qfx-series/QFX5110-48S-AFI/ [GATEWAY_INTERFACE] => CGI/1.1 [SERVER_PROTOCOL] => HTTP/1.0 [REQUEST_METHOD] => GET [QUERY_STRING] => [REQUEST_URI] => /catalog/kommutatory/juniper-networks/qfx-series/QFX5110-48S-AFI/ [SCRIPT_NAME] => /bitrix/urlrewrite.php [PHP_SELF] => /bitrix/urlrewrite.php [REQUEST_TIME_FLOAT] => 1701753495.898 [REQUEST_TIME] => 1701753495 [argv] => Array ( ) [argc] => 0 [REAL_FILE_PATH] => /catalog/index.php )
Оформление заказа
Заказ оформлен!